Title

Home
Articles Search
camshaft bearings

Articles search results for camshaft bearings

Showing 1 to 20 of 22 articles

To scatter or not to scatter, that is the question. This whole 'scattering' deal has befuddled many. The only real prose produced on the subject, and 'advice' handed out by many so-called 'specialists' tends to be somewhat tainted with large chunks of mysticism - inferring there's some kind of black art involved. The simple fact is the principle is very basic and easy; it's getting a cam with the right profile and figures applied to it that will actually work as a scatter profile that's the hard part. And this article does not mean I am all for scatter pattern cams. I will illuminate… We are all pretty much aware that the A-series is a real oddity, largely because of the siamese (shared) port work - cylinders 1 & 2 share an inlet port, cylinders 3 & 4 share an inlet port, and cylinders 2 & 3 share an exhaust port. Very weird compared to the more familiar head designs found on almost every other engine type that has one inlet and one exhaust port per cylinder.

GEARBOX - Final Drives, standard

FDs are ultimately responsible for the way your Mini goes after engine, gearbox, and under carriage tweaking has been applied. part numbers: DAM3647, 22G443, 22G101, 22G340, 22G338, DAM4131, 22A399, DAM4162, 22G940, 22A399, DAM2677, DAM2679, 22A411, 22A413, DAM2808, DAM6327, DAM2808, TCC10001, Terminology - FD - Final Drive/diff ratio The aforementioned and the degree to which it has been done will affect the decision as to what FD is required. They’re also responsible for much discussion between many tuning freaks, and confusion to the less informed. There’s nothing weird or scientific about it. Maximum acceleration requires a low final drive, top speed a high one. And these two terms confuse most. The confusion being the LOWER number denotes a HIGHER gear. Likewise the higher number denotes a lower gear. Likewise the higher number denotes a lower gear. Largely because the lower the ratio, the slower you go and vice versa.

During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. During a discourse with the editorial staff at Mini Mag, it was decided the build feature presented an ideal opportunity to demonstrate just exactly what such an engine build is capable of in days where it's generally believed you have to have an all-singing, all-dancing 1380cc engine to have an enjoyable road burner - leaving those with very limited budgets a little depressed. So the idea was to finish the engine off using a relatively 'mild' specification to maximise drivability. The camshaft used was the fantastically versatile Swiftune Racing SW5 profile that provides drive from nowhere up to 7,000rpm - d

Rocker gear - General compendium

Whether you’re building a solid road performer or fire-breathing monster, the main goal is to improve air/fuel flow into the engine. The more you can get in, the more power you can get out. Cheapest chunk of power improvement comes from sorting the asthmatic manifolding and exhaust by applying a stage one kit. Then what? Considering the ‘get more in to get more out’ theme, the main restriction - all else being equal - is the valves and their behavior. How big they are, how efficient they are and how long they’re open for determines how much gets in with each gulp each bore/piston makes. Modified cylinder heads are popularly next, although it has to be said that although a well modified cylinder head will improve performance, the gain against cost is nowhere near that given by the ‘stage one’ kit application. A good stage one kit’s improvement verses cost is around £12.50 per 1 hp, a decent modified head typically £30 per 1hp - dependent on application. Hmm.

Engine - Identification Data Updated

If you have the engine tag still attached to the engine - just in front/below the thermostat housing - or perhaps the original engine number in the log book then the following should help you determine which engine you have. For Metro units, see 'Engine - Metro identification data'. Original engine identification numbers 850cc 8A Austin up to 25000 8MB Morris up to 25000 8AM Austin & Morris 25000 onwards 8AH Austin & Morris Automatic 8AJ Austin & Morris closed circuit breathing 8AK Austin & Morris automatic with closed circuit breathing 8WR Wolseley Hornet & Riley Elf 8AC Moke 85H/101 All variants 1969 onwards Note: third suffix letter denotes compression type, L = Low, H = High, e.g. 8AM/U/H101 denotes high compression. 998cc 9WR Wolseley Hornet & Riley Elf Mk2, pre closed circuit breathing 9AD Austin, Wolseley Hornet & Riley Elf Mk2 with remote type gearbox and closed

The red lights went out after a short wait and the 2005 season was underway. I held position and went early on the attack,

It seems remarkable, but a winter break of over six months is never enough time to prepare a racing car! The truth is, at long last I've completely refurbished the hall, stairs and landing at home. That concludes a 7 and a half year ...

DIY enthusiasts often believe that building an engine to give excellent all-round road performance is beyond them. Mainly from comparisons made between what they have been able to achieve and what specialists say should be achievable from any particular type of engine build.

Generally scrambled further by the non-perfect match of parts and components used between aforementioned specialist and erstwhile DIY-er, and the ritual 'nose-tapping and knowing winks' display of those specialists. Something you can very nearly 'see' even when talking to such folk on the phone - or that inimitable 'ah, yes, well…' So some form of 'black art' is implied. Whilst there is most definitely a degree of 'feel' involved between the real specialist's results and those of just a good engineer - the bones of the deal is subject to no such thing and is certainly within the capability of the DIY enthusiast given the necessary information. And that has been the problem.

Engine - Identification data

Lubrication - Oil pumps

Essential to the well being of every engine is its oil pump and oil. Much in the same way as the heart and blood is deemed relatively important to us humans! It's also another of those greatly misunderstood and, unfortunately, misrepresented subjects connected to engines.

An alarming number of so-called A-series engine specialists would have you believe that once parting with a veritable bundle of your hard earned readies on that mega motor, what you really need to keep it in good health is a high-pressure/high-flow oil pump. Seems a sensible consideration - except in the A-series world it's impossible. Oh, there are pumps that will give better flow rates than others, but high pressure? Absolutely not.

Oil pressure is regulated by the relief valve in the block of an A-series, not in the oil pump as with say a Ford. Yeah, you know - the one that gets jammed, causing heart failure as you believe your crank bearings have dissolved, and is a pig to get out.

C-AJJ4064 – 8 PORT CYLINDER HEAD

The combustion chambers are left in a basic shape only with a nominal 16.4cc which allows enough metal for those with the latest advanced ideas of shape to apply them and create the correct compression ratios for the desired use.

Valve and seat material specification allows use of unleaded fuel. Thoroughly clean the cylinder head before final assembly. Check that the small circlip is in the correct position in the valve guide at a point where the guide protrudes through the cylinder head beneath the valve seat. Place the valve spring seat over...

The cases are machined from steel billets, and all components manufactured to exacting specifications from high grade materials. On the road tests have proven that the bevel gear and plate pack are capable of absorbing 230lh ft of torque in front wheel drive applications. The cross pins are much more substantial than other types.

Last year at Willow springs, California the gauntlet was thrown down by Mini Mania, USA, to see which was superior. The front wheel drive saloon, or the rear drive sports car.

When these cars were new there were very few organised races for them to compete against each other and the Sprite MK1 or Frogeye as we know it, because of its headlights mounted on the bonnet, only had a 948cc engine while the early Minis only had 848cc or 1275cc of the Cooper “S”. Times have changed and most Frogeyes...

Mini Spares - 8-Port Project Min If you refer back to the October 1993 edition of Mini Tech News, we were about to embark on modifying the suspension. As luck would or would not have it, we had the advantage of setting up and sorting out the Monte Carlo Mini, which would help us in some directions. After checking the ride height of the car, it was higher on the left hand side by 1 Vs' at the front and W' at the back.

The Monte Minis were entered in the 1300cc Group A category, which demands stringent safety requirements and a minimum weight of 760kgs. Our Mini weighed 760kgs prior to a full removal of all sound deadening material. The new homologated multi point roll cage from Safety Devices was fitted. This is not a job for the average enthusiast.

Articles search results for camshaft bearings

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals